LN100 2-axis gyro-stabilized dual optical gimbal with 4K visible light and long-wave uncooled thermal imaging, low latency, target recognition and multi-target tracking for monitoring, inspection and FPV applications.

LT50 1280*1024 HD IR Thermal Image, 12μm pixel pitch, Closer and Clearer. The IR thermal Camera is a High Definition (1280*1024) Uncooled Long Wave (8μm~14μm) Thermal Image with 50mm Focus Length. Designed For Long Range Detection.

This professional 20-channel UAV ground control station features dual sunlight-readable touch screens and offers a 15ms remote delay. Powered by a 12V/17000mAh battery, it provides 3.5 hours of endurance. It runs on an i7 processor, with 8GB memory and 128GB storage, supporting both Windows and Linux. With an IP53 rugged design, it operates from -10°C to +60°C and weighs 6270g.

This professional 20-channel UAV ground control station offers a 20km remote control range, dual sunlight-readable touch screens, and 2.4 hours of endurance. It supports both Windows and Linux, features an IP53 rugged design, and operates from -10°C to +60°C. The air terminal operates on 2.4GHz and 1.4GHz standards, with a 25dBm power output.

1100mAh This 6S LiPo battery has a nominal voltage of 22.2V, a capacity of 1100mAh, and a 130C high discharge rate, providing 24.42Wh of energy. It weighs 186.3g (±15g) and measures 34.44080mm, with a charging cut-off voltage of 25.2V and a discharging cut-off voltage of 21.6V.

The LF-L10 series is a professional 3-axis gimbal camera with an 8MP wide-angle camera and an infrared camera. It features Ethernet video output, wide voltage input from 12V to 36V, and an IP44 rating. With a lightweight design of ≤150g, it is suitable for professional imaging and monitoring applications.